Custom Shoulder Pad — Genuine Leather with Embroidery
We supply shoulder pad to garment factories and brands, built in Genuine Leather with embroidery for uniform and corporate programmes. On a trim like this the specification that decides the outcome is recovery after compression, because a pad that flattens is visible, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 1000 pieces per style per finish.
The failures here are predictable: a supplier who disappears once the deposit is paid, or minimum order quantities far above what a growing brand can absorb. We lock material, finish, dimension and tolerance before bulk, and prepare CPSIA and California Prop 65 compliance so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Shoulder Pad |
|---|---|
| Thickness | 10 mm |
| Type | sleeve head pad |
| Base material | Genuine Leather |
| Finish / process | Embroidery |
| Colour options | 6 Pantone-matched shades |
| Packing | polybag per 100 |
| MOQ | 1000 pieces per style per finish |
| Sampling | 12 working days, 4 days per revision |
| Bulk lead time | 20-50 days after approval |
| Compliance | CPSIA and California Prop 65 compliance; REACH nickel-release test for metal findings |
| Ship to | Los Angeles or New York (North America) |
What buyers can customise
- Woven Jacquard — available on Genuine Leather, quoted per position and per colour.
- Overlocked Edge — available on Genuine Leather, quoted per position and per colour.
- Heat-Cut Edge — available on Genuine Leather, quoted per position and per colour.
- Sewn Edge — available on Genuine Leather, quoted per position and per colour.
- Piece Dyeing — available on Genuine Leather, quoted per position and per colour.
- UV Printing — available on Genuine Leather, quoted per position and per colour.
- Yarn Dyeing — available on Genuine Leather, quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed thickness
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with embroidery applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for REACH nickel-release test for metal findings are prepared for the destination market. We ship to Los Angeles or New York with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same recovery after compression.
FAQ
How long does sampling take?
A first sample takes 12 working days, and each revision about 4 days.
Which compliance documents do you provide?
We prepare REACH nickel-release test for metal findings and the supporting test reports for the destination market.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Start your shoulder pad programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
