Custom Button in Spandex Blend with Overlocked Edge for Outerwear and Jacket Programmes

Custom Button — Spandex Blend with Overlocked Edge

We supply button to garment factories and brands, built in Spandex Blend with overlocked edge for uniform and corporate programmes. On a trim like this the specification that decides the outcome is shade match across a full box, since buttons are bought by the gross, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 5000 pieces per style per finish.

The failures here are predictable: packing that arrives mixed and unusable on the line, or a supplier who disappears once the deposit is paid. We lock material, finish, dimension and tolerance before bulk, and prepare GSO conformity with Arabic labelling so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Sequin Stitching — available on Spandex Blend, quoted per position and per colour.
• Epoxy Dome — available on Spandex Blend, quoted per position and per colour.
• Nickel Plating — available on Spandex Blend, quoted per position and per colour.
• Dye-Sublimation Printing — available on Spandex Blend, quoted per position and per colour.
• UV Printing — available on Spandex Blend, quoted per position and per colour.
• Pantone Colour Matching — available on Spandex Blend, quoted per position and per colour.
• Hot Foil Stamping — available on Spandex Blend, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed ligne
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with overlocked edge applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Jebel Ali with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same shade match across a full box.

FAQ

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

How long does sampling take?

A first sample takes 10 working days, and each revision about 5 days.

What is the minimum order?

Programmes start at 5000 pieces per style per finish. Mixed sizes are fine within one style.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Start your button programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.