Custom Button in Polypropylene (PP) with Powder Coating for Denim and Workwear Programmes

Custom Button — Polypropylene (PP) with Powder Coating

We supply button to garment factories and brands, built in Polypropylene (PP) with powder coating for denim and workwear programmes. On a trim like this the specification that decides the outcome is hole burr, because a rough burr cuts thread on the line, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 2000 pieces per style per finish.

The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or a supplier who disappears once the deposit is paid. We lock material, finish, dimension and tolerance before bulk, and prepare UKCA and REACH documentation so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Pantone Colour Matching — available on Polypropylene (PP), quoted per position and per colour.
• Sewn Edge — available on Polypropylene (PP), quoted per position and per colour.
• Gold Plating — available on Polypropylene (PP), quoted per position and per colour.
• Debossing — available on Polypropylene (PP), quoted per position and per colour.
• Hard Enamel Fill — available on Polypropylene (PP), quoted per position and per colour.
• Gunmetal Plating — available on Polypropylene (PP), quoted per position and per colour.
• Hot Foil Stamping — available on Polypropylene (PP), quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed ligne
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with powder coating applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Felixstowe with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same hole burr.

FAQ

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Which compliance documents do you provide?

We prepare OEKO-TEX Standard 100 for dyes and trims and the supporting test reports for the destination market.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Start your button programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.