Custom Button in Corozo Nut with UV Printing for Uniform and Corporate Programmes

Custom Button — Corozo Nut with UV Printing

We supply button to garment factories and brands, built in Corozo Nut with uv printing for uniform and corporate programmes. On a trim like this the specification that decides the outcome is shade match across a full box, since buttons are bought by the gross, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 500 pieces per style per finish.

The failures here are predictable: colour drift between the approved sample and the bulk trim, or packing that arrives mixed and unusable on the line. We lock material, finish, dimension and tolerance before bulk, and prepare REACH and GPSR documentation so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Sewn Edge — available on Corozo Nut, quoted per position and per colour.
• Soft Enamel Fill — available on Corozo Nut, quoted per position and per colour.
• Heat Transfer Printing — available on Corozo Nut, quoted per position and per colour.
• Anti-Rust Treatment — available on Corozo Nut, quoted per position and per colour.
• Overlocked Edge — available on Corozo Nut, quoted per position and per colour.
• Rhinestone Setting — available on Corozo Nut, quoted per position and per colour.
• Fringe Finish — available on Corozo Nut, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed ligne
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with uv printing applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for GRS recycled content claim are prepared for the destination market. We ship to Rotterdam or Felixstowe with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same shade match across a full box.

FAQ

Which compliance documents do you provide?

We prepare GRS recycled content claim and the supporting test reports for the destination market.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Start your button programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.