Custom Button in Resin Rhinestone with Offset Printing for Childrenswear and Schoolwear

Custom Button — Resin Rhinestone with Offset Printing

We supply button to garment factories and brands, built in Resin Rhinestone with offset printing for uniform and corporate programmes. On a trim like this the specification that decides the outcome is shade match across a full box, since buttons are bought by the gross, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 500 pieces per style per finish.

The failures here are predictable: a finish that tarnishes or rubs off after washing, or a supplier who disappears once the deposit is paid. We lock material, finish, dimension and tolerance before bulk, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Heat Transfer Printing — available on Resin Rhinestone, quoted per position and per colour.
• Debossing — available on Resin Rhinestone, quoted per position and per colour.
• Beaded Detail — available on Resin Rhinestone, quoted per position and per colour.
• Die-Casting — available on Resin Rhinestone, quoted per position and per colour.
• Injection Moulding — available on Resin Rhinestone, quoted per position and per colour.
• Rubber Coating — available on Resin Rhinestone, quoted per position and per colour.
• Fringe Finish — available on Resin Rhinestone, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed ligne
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with offset printing applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Shanghai or Shenzhen with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same shade match across a full box.

FAQ

What is the minimum order?

Programmes start at 500 pieces per style per finish. Mixed sizes are fine within one style.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Start your button programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.