Custom Interlining in Polyethylene (PE) with Soft Enamel Fill for Uniform and Corporate Programmes

Custom Interlining — Polyethylene (PE) with Soft Enamel Fill

We supply interlining to garment factories and brands, built in Polyethylene (PE) with soft enamel fill for e-commerce and small-batch brands. On a trim like this the specification that decides the outcome is shrinkage match to the shell fabric, or the panel bubbles, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 1000 pieces per style per finish.

The failures here are predictable: a finish that tarnishes or rubs off after washing, or unclear responsibility when a defect shows up after washing. We lock material, finish, dimension and tolerance before bulk, and prepare CPSIA and California Prop 65 compliance so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Anti-Rust Treatment — available on Polyethylene (PE), quoted per position and per colour.
• Injection Moulding — available on Polyethylene (PE), quoted per position and per colour.
• Powder Coating — available on Polyethylene (PE), quoted per position and per colour.
• Overlocked Edge — available on Polyethylene (PE), quoted per position and per colour.
• Braided Weave — available on Polyethylene (PE), quoted per position and per colour.
• Heat-Cut Edge — available on Polyethylene (PE), quoted per position and per colour.
• Woven Jacquard — available on Polyethylene (PE), quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed weight
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with soft enamel fill applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Los Angeles or New York with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same shrinkage match to the shell fabric.

FAQ

How long does sampling take?

A first sample takes 10 working days, and each revision about 4 days.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Which compliance documents do you provide?

We prepare OEKO-TEX Standard 100 for dyes and trims and the supporting test reports for the destination market.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Start your interlining programme

Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.