Custom Button — Bamboo with Offset Printing
We supply button to garment factories and brands, built in Bamboo with offset printing for e-commerce and small-batch brands. On a trim like this the specification that decides the outcome is hole burr, because a rough burr cuts thread on the line, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 5000 pieces per style per finish.
The failures here are predictable: packing that arrives mixed and unusable on the line, or unclear responsibility when a defect shows up after washing. We lock material, finish, dimension and tolerance before bulk, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Button |
|---|---|
| Ligne | 32L / 20 mm |
| Attachment | 4-hole sew-through |
| Base material | Bamboo |
| Finish / process | Offset Printing |
| Colour options | 8 Pantone-matched shades |
| Packing | bulk packed |
| MOQ | 5000 pieces per style per finish |
| Sampling | 7 working days, 4 days per revision |
| Bulk lead time | 15-30 days after approval |
| Compliance | GB 18401 safety classification with GB/T 29862 fibre labelling; OEKO-TEX Standard 100 for dyes and trims |
| Ship to | Shanghai or Shenzhen (Mainland China) |
What buyers can customise
- Rose Gold Plating — available on Bamboo, quoted per position and per colour.
- Paint Spray — available on Bamboo, quoted per position and per colour.
- Sewn Edge — available on Bamboo, quoted per position and per colour.
- Rubber Coating — available on Bamboo, quoted per position and per colour.
- Antique Brass Plating — available on Bamboo, quoted per position and per colour.
- Screen Printing — available on Bamboo, quoted per position and per colour.
- Gunmetal Plating — available on Bamboo, quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed ligne
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with offset printing applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Shanghai or Shenzhen with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same hole burr.
FAQ
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
How long does sampling take?
A first sample takes 7 working days, and each revision about 4 days.
Which compliance documents do you provide?
We prepare OEKO-TEX Standard 100 for dyes and trims and the supporting test reports for the destination market.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
Start your button programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
