Custom Interlining — Denim with Injection Moulding
We supply interlining to garment factories and brands, built in Denim with injection moulding for childrenswear and schoolwear. On a trim like this the specification that decides the outcome is shrinkage match to the shell fabric, or the panel bubbles, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 1000 pieces per style per finish.
The failures here are predictable: unclear responsibility when a defect shows up after washing, or packing that arrives mixed and unusable on the line. We lock material, finish, dimension and tolerance before bulk, and prepare CPSIA and California Prop 65 compliance so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Interlining |
|---|---|
| Weight | 120 gsm |
| Type | sew-in interlining |
| Base material | Denim |
| Finish / process | Injection Moulding |
| Colour options | 8 Pantone-matched shades |
| Packing | carded |
| MOQ | 1000 pieces per style per finish |
| Sampling | 14 working days, 4 days per revision |
| Bulk lead time | 25-40 days after approval |
| Compliance | CPSIA and California Prop 65 compliance; REACH nickel-release test for metal findings |
| Ship to | Los Angeles or New York (North America) |
What buyers can customise
- Crochet — available on Denim, quoted per position and per colour.
- Injection Moulding — available on Denim, quoted per position and per colour.
- Sewn Edge — available on Denim, quoted per position and per colour.
- Anti-Rust Treatment — available on Denim, quoted per position and per colour.
- Mercerised Finish — available on Denim, quoted per position and per colour.
- Embroidery — available on Denim, quoted per position and per colour.
- Braided Weave — available on Denim, quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed weight
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with injection moulding applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for REACH nickel-release test for metal findings are prepared for the destination market. We ship to Los Angeles or New York with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same shrinkage match to the shell fabric.
FAQ
What is the minimum order?
Programmes start at 1000 pieces per style per finish. Mixed sizes are fine within one style.
How long does sampling take?
A first sample takes 14 working days, and each revision about 4 days.
Which compliance documents do you provide?
We prepare REACH nickel-release test for metal findings and the supporting test reports for the destination market.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Start your interlining programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
