Custom Interlining in Polyethylene (PE) with Injection Moulding for Outerwear and Jacket Programmes

Custom Interlining — Polyethylene (PE) with Injection Moulding

We supply interlining to garment factories and brands, built in Polyethylene (PE) with injection moulding for denim and workwear programmes. On a trim like this the specification that decides the outcome is shrinkage match to the shell fabric, or the panel bubbles, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 5000 pieces per style per finish.

The failures here are predictable: shade variation within one carton, or minimum order quantities far above what a growing brand can absorb. We lock material, finish, dimension and tolerance before bulk, and prepare CPSIA and California Prop 65 compliance so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Soft Enamel Fill — available on Polyethylene (PE), quoted per position and per colour.
• Overlocked Edge — available on Polyethylene (PE), quoted per position and per colour.
• Piece Dyeing — available on Polyethylene (PE), quoted per position and per colour.
• Sewn Edge — available on Polyethylene (PE), quoted per position and per colour.
• Paint Spray — available on Polyethylene (PE), quoted per position and per colour.
• Anti-Rust Treatment — available on Polyethylene (PE), quoted per position and per colour.
• Powder Coating — available on Polyethylene (PE), quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed weight
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with injection moulding applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for colour fastness to washing, rubbing and light are prepared for the destination market. We ship to Los Angeles or New York with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same shrinkage match to the shell fabric.

FAQ

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

What is the minimum order?

Programmes start at 5000 pieces per style per finish. Mixed sizes are fine within one style.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Start your interlining programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.