Custom Button in Resin Rhinestone with Offset Printing for Denim and Workwear Programmes

Custom Button — Resin Rhinestone with Offset Printing

We supply button to garment factories and brands, built in Resin Rhinestone with offset printing for childrenswear and schoolwear. On a trim like this the specification that decides the outcome is hole burr, because a rough burr cuts thread on the line, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 3000 pieces per style per finish.

The failures here are predictable: shade variation within one carton, or a finish that tarnishes or rubs off after washing. We lock material, finish, dimension and tolerance before bulk, and prepare REACH and GPSR documentation so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Soft Enamel Fill — available on Resin Rhinestone, quoted per position and per colour.
• Dye-Sublimation Printing — available on Resin Rhinestone, quoted per position and per colour.
• Antique Brass Plating — available on Resin Rhinestone, quoted per position and per colour.
• Gunmetal Plating — available on Resin Rhinestone, quoted per position and per colour.
• Antique Silver — available on Resin Rhinestone, quoted per position and per colour.
• Debossing — available on Resin Rhinestone, quoted per position and per colour.
• Pantone Colour Matching — available on Resin Rhinestone, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed ligne
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with offset printing applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for REACH nickel-release test for metal findings are prepared for the destination market. We ship to Rotterdam or Felixstowe with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same hole burr.

FAQ

Which compliance documents do you provide?

We prepare REACH nickel-release test for metal findings and the supporting test reports for the destination market.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Start your button programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.