Custom Cord Stopper in Natural Rubber with Rose Gold Plating for Outerwear and Jacket Programmes

Custom Cord Stopper — Natural Rubber with Rose Gold Plating

We supply cord stopper to garment factories and brands, built in Natural Rubber with rose gold plating for denim and workwear programmes. On a trim like this the specification that decides the outcome is hole tolerance, so the cord threads without forcing, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 500 pieces per style per finish.

The failures here are predictable: colour drift between the approved sample and the bulk trim, or shade variation within one carton. We lock material, finish, dimension and tolerance before bulk, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Soft Enamel Fill — available on Natural Rubber, quoted per position and per colour.
• Sewn Edge — available on Natural Rubber, quoted per position and per colour.
• Heat Transfer Printing — available on Natural Rubber, quoted per position and per colour.
• Black Oxide — available on Natural Rubber, quoted per position and per colour.
• Antique Silver — available on Natural Rubber, quoted per position and per colour.
• Screen Printing — available on Natural Rubber, quoted per position and per colour.
• Offset Printing — available on Natural Rubber, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed bore
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with rose gold plating applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Shanghai or Shenzhen with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same hole tolerance.

FAQ

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Which compliance documents do you provide?

We prepare EN 71 part 3 for decorative components and the supporting test reports for the destination market.

How long does sampling take?

A first sample takes 10 working days, and each revision about 4 days.

Start your cord stopper programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.