Custom Sewing Thread — Mesh with Heat-Cut Edge
We supply sewing thread to garment factories and brands, built in Mesh with heat-cut edge for denim and workwear programmes. On a trim like this the specification that decides the outcome is shade continuity across cones in one bulk lot, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 1000 pieces per style per finish.
The failures here are predictable: colour drift between the approved sample and the bulk trim, or minimum order quantities far above what a growing brand can absorb. We lock material, finish, dimension and tolerance before bulk, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Sewing Thread |
|---|---|
| Count | Tex 60 |
| Type | filament polyester |
| Base material | Mesh |
| Finish / process | Heat-Cut Edge |
| Colour options | 12 Pantone-matched shades |
| Packing | bulk packed |
| MOQ | 1000 pieces per style per finish |
| Sampling | 12 working days, 3 days per revision |
| Bulk lead time | 20-40 days after approval |
| Compliance | GB 18401 safety classification with GB/T 29862 fibre labelling; REACH nickel-release test for metal findings |
| Ship to | Shanghai or Shenzhen (Mainland China) |
What buyers can customise
- Sewn Edge — available on Mesh, quoted per position and per colour.
- Hard Enamel Fill — available on Mesh, quoted per position and per colour.
- Injection Moulding — available on Mesh, quoted per position and per colour.
- Powder Coating — available on Mesh, quoted per position and per colour.
- Woven Jacquard — available on Mesh, quoted per position and per colour.
- Paint Spray — available on Mesh, quoted per position and per colour.
- Epoxy Dome — available on Mesh, quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed count
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with heat-cut edge applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for REACH nickel-release test for metal findings are prepared for the destination market. We ship to Shanghai or Shenzhen with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same shade continuity across cones in one bulk lot.
FAQ
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
What is the minimum order?
Programmes start at 1000 pieces per style per finish. Mixed sizes are fine within one style.
How long does sampling take?
A first sample takes 12 working days, and each revision about 3 days.
Start your sewing thread programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
