Custom Lace Trim in Genuine Leather with Injection Moulding for Childrenswear and Schoolwear

Custom Lace Trim — Genuine Leather with Injection Moulding

We supply lace trim to garment factories and brands, built in Genuine Leather with injection moulding for denim and workwear programmes. On a trim like this the specification that decides the outcome is edge finish, since a cut edge frays on the first wash, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 2000 pieces per style per finish.

The failures here are predictable: unclear responsibility when a defect shows up after washing, or a supplier who disappears once the deposit is paid. We lock material, finish, dimension and tolerance before bulk, and prepare GSO conformity with Arabic labelling so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Rhinestone Setting — available on Genuine Leather, quoted per position and per colour.
• Die-Casting — available on Genuine Leather, quoted per position and per colour.
• Embroidery — available on Genuine Leather, quoted per position and per colour.
• Yarn Dyeing — available on Genuine Leather, quoted per position and per colour.
• Fringe Finish — available on Genuine Leather, quoted per position and per colour.
• Heat-Cut Edge — available on Genuine Leather, quoted per position and per colour.
• Sequin Stitching — available on Genuine Leather, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed width
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with injection moulding applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Jebel Ali with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same edge finish.

FAQ

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Start your lace trim programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.