Custom Tag Pin in Nickel-Free Alloy with Screen Printing for Uniform and Corporate Programmes

Custom Tag Pin — Nickel-Free Alloy with Screen Printing

We supply tag pin to garment factories and brands, built in Nickel-Free Alloy with screen printing for uniform and corporate programmes. On a trim like this the specification that decides the outcome is head strength, because a snapped head leaves the pin in the garment, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 500 pieces per style per finish.

The failures here are predictable: colour drift between the approved sample and the bulk trim, or shade variation within one carton. We lock material, finish, dimension and tolerance before bulk, and prepare SNI or SIRIM documentation per destination so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Digital Printing — available on Nickel-Free Alloy, quoted per position and per colour.
• Anti-Rust Treatment — available on Nickel-Free Alloy, quoted per position and per colour.
• Debossing — available on Nickel-Free Alloy, quoted per position and per colour.
• Soft Enamel Fill — available on Nickel-Free Alloy, quoted per position and per colour.
• Injection Moulding — available on Nickel-Free Alloy, quoted per position and per colour.
• Heat Transfer Printing — available on Nickel-Free Alloy, quoted per position and per colour.
• Sewn Edge — available on Nickel-Free Alloy, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed length
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with screen printing applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Jakarta or Port Klang with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same head strength.

FAQ

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Start your tag pin programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.