Custom Tag Pin in Zinc Alloy with Hot Foil Stamping for Uniform and Corporate Programmes

Custom Tag Pin — Zinc Alloy with Hot Foil Stamping

We supply tag pin to garment factories and brands, built in Zinc Alloy with hot foil stamping for bridal and eveningwear studios. On a trim like this the specification that decides the outcome is needle compatibility with the tagging gun on your line, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 5000 pieces per style per finish.

The failures here are predictable: a supplier who disappears once the deposit is paid, or colour drift between the approved sample and the bulk trim. We lock material, finish, dimension and tolerance before bulk, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Dye-Sublimation Printing — available on Zinc Alloy, quoted per position and per colour.
• Laser Engraving — available on Zinc Alloy, quoted per position and per colour.
• Paint Spray — available on Zinc Alloy, quoted per position and per colour.
• Soft Enamel Fill — available on Zinc Alloy, quoted per position and per colour.
• Heat Transfer Printing — available on Zinc Alloy, quoted per position and per colour.
• Debossing — available on Zinc Alloy, quoted per position and per colour.
• Powder Coating — available on Zinc Alloy, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed length
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with hot foil stamping applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for colour fastness to washing, rubbing and light are prepared for the destination market. We ship to Shanghai or Shenzhen with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same needle compatibility with the tagging gun on your line.

FAQ

Which compliance documents do you provide?

We prepare colour fastness to washing, rubbing and light and the supporting test reports for the destination market.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

How long does sampling take?

A first sample takes 7 working days, and each revision about 3 days.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Start your tag pin programme

Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.