Custom Mannequin in Nickel-Free Alloy with Soft Enamel Fill for Uniform and Corporate Programmes

Custom Mannequin — Nickel-Free Alloy with Soft Enamel Fill

We supply mannequin to garment factories and brands, built in Nickel-Free Alloy with soft enamel fill for outerwear and jacket programmes. On a trim like this the specification that decides the outcome is base stability when a full outfit is pinned on, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 1000 pieces per style per finish.

The failures here are predictable: shade variation within one carton, or a finish that tarnishes or rubs off after washing. We lock material, finish, dimension and tolerance before bulk, and prepare CPSIA and California Prop 65 compliance so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Dye-Sublimation Printing — available on Nickel-Free Alloy, quoted per position and per colour.
• Anti-Rust Treatment — available on Nickel-Free Alloy, quoted per position and per colour.
• Woven Jacquard — available on Nickel-Free Alloy, quoted per position and per colour.
• Pleating — available on Nickel-Free Alloy, quoted per position and per colour.
• Stamping — available on Nickel-Free Alloy, quoted per position and per colour.
• Rubber Coating — available on Nickel-Free Alloy, quoted per position and per colour.
• Offset Printing — available on Nickel-Free Alloy, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed height
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with soft enamel fill applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for azo dye-free declaration are prepared for the destination market. We ship to Los Angeles or New York with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same base stability when a full outfit is pinned on.

FAQ

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Which compliance documents do you provide?

We prepare azo dye-free declaration and the supporting test reports for the destination market.

How long does sampling take?

A first sample takes 14 working days, and each revision about 4 days.

Start your mannequin programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.