Custom Mannequin — EVA Foam with Laser Engraving
We supply mannequin to garment factories and brands, built in EVA Foam with laser engraving for bridal and eveningwear studios. On a trim like this the specification that decides the outcome is measurement accuracy against the size chart you sell, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 2000 pieces per style per finish.
The failures here are predictable: shade variation within one carton, or a finish that tarnishes or rubs off after washing. We lock material, finish, dimension and tolerance before bulk, and prepare SNI or SIRIM documentation per destination so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Mannequin |
|---|---|
| Height | 150 cm |
| Type | half body form |
| Base material | EVA Foam |
| Finish / process | Laser Engraving |
| Colour options | 6 Pantone-matched shades |
| Packing | carded |
| MOQ | 2000 pieces per style per finish |
| Sampling | 10 working days, 4 days per revision |
| Bulk lead time | 20-50 days after approval |
| Compliance | SNI or SIRIM documentation per destination; OEKO-TEX Standard 100 for dyes and trims |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Hard Enamel Fill — available on EVA Foam, quoted per position and per colour.
- Woven Jacquard — available on EVA Foam, quoted per position and per colour.
- Ultrasonic Welding — available on EVA Foam, quoted per position and per colour.
- Heat Transfer Printing — available on EVA Foam, quoted per position and per colour.
- Braided Weave — available on EVA Foam, quoted per position and per colour.
- Debossing — available on EVA Foam, quoted per position and per colour.
- Sewn Edge — available on EVA Foam, quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed height
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with laser engraving applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Jakarta or Port Klang with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same measurement accuracy against the size chart you sell.
FAQ
How long does sampling take?
A first sample takes 10 working days, and each revision about 4 days.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
What is the minimum order?
Programmes start at 2000 pieces per style per finish. Mixed sizes are fine within one style.
Start your mannequin programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
