Custom Thread Trimmer — PVC with Sewn Edge
We supply thread trimmer to garment factories and brands, built in PVC with sewn edge for bridal and eveningwear studios. On a trim like this the specification that decides the outcome is tip safety, since trimming happens close to the finished garment, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 1000 pieces per style per finish.
The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or shade variation within one carton. We lock material, finish, dimension and tolerance before bulk, and prepare SNI or SIRIM documentation per destination so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Thread Trimmer |
|---|---|
| Blade length | 35 mm |
| Type | safety-tip trimmer |
| Base material | PVC |
| Finish / process | Sewn Edge |
| Colour options | 6 Pantone-matched shades |
| Packing | boxed sets |
| MOQ | 1000 pieces per style per finish |
| Sampling | 10 working days, 5 days per revision |
| Bulk lead time | 20-50 days after approval |
| Compliance | SNI or SIRIM documentation per destination; REACH nickel-release test for metal findings |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Antique Silver — available on PVC, quoted per position and per colour.
- Nickel Plating — available on PVC, quoted per position and per colour.
- Chrome Plating — available on PVC, quoted per position and per colour.
- Epoxy Dome — available on PVC, quoted per position and per colour.
- Rose Gold Plating — available on PVC, quoted per position and per colour.
- Brushed Finish — available on PVC, quoted per position and per colour.
- Gunmetal Plating — available on PVC, quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed blade length
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with sewn edge applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for REACH nickel-release test for metal findings are prepared for the destination market. We ship to Jakarta or Port Klang with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same tip safety.
FAQ
What is the minimum order?
Programmes start at 1000 pieces per style per finish. Mixed sizes are fine within one style.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
How long does sampling take?
A first sample takes 10 working days, and each revision about 5 days.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Start your thread trimmer programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
