Custom Balaclava in Polyethylene (PE) with Piece Dyeing for Bridal and Eveningwear Studios

Custom Balaclava — Polyethylene (PE) with Piece Dyeing

We supply balaclava to brands, retailers, uniform and promotional programmes, made in Polyethylene (PE) with piece dyeing for bridal and eveningwear studios. On headwear the specification that decides whether it sells or comes back is seam flatness, since these sit against the face for hours — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 500 pieces per style.

The failures here are predictable: a supplier who disappears once the deposit is paid, or a finish that tarnishes or rubs off after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Tassel Finish — available on Polyethylene (PE), quoted per position and per colour.
• Die-Casting — available on Polyethylene (PE), quoted per position and per colour.
• Steam Blocking — available on Polyethylene (PE), quoted per position and per colour.
• Distressed Wash — available on Polyethylene (PE), quoted per position and per colour.
• Unstructured Crown — available on Polyethylene (PE), quoted per position and per colour.
• Embroidery — available on Polyethylene (PE), quoted per position and per colour.
• Rhinestone Setting — available on Polyethylene (PE), quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Polyethylene (PE)
3. Shape sample with piece dyeing applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for colour fastness to washing, rubbing and light are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same seam flatness.

FAQ

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

What is the minimum order?

Programmes start at 500 pieces per style per finish. Mixed sizes are fine within one style.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Which compliance documents do you provide?

We prepare colour fastness to washing, rubbing and light and the supporting test reports for the destination market.

Start your balaclava programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.