Custom Fashion Hat — Brass with Water-Repellent Finish
We supply fashion hat to brands, retailers, uniform and promotional programmes, made in Brass with water-repellent finish for e-commerce and small-batch brands. On headwear the specification that decides whether it sells or comes back is reproducing a reference sample exactly, since these are odd shapes — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 2000 pieces per style.
The failures here are predictable: unclear responsibility when a defect shows up after washing, or minimum order quantities far above what a growing brand can absorb. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Fashion Hat |
|---|---|
| Size | L / 59 cm |
| Type | convertible hat |
| Material | Brass |
| Construction / finish | Water-Repellent Finish |
| Colour options | 12 shades, Pantone matched |
| Packing | single polybag |
| MOQ | 2000 pieces per style |
| Sampling | 7 working days, 5 days per revision |
| Bulk lead time | 15-30 days after approval |
| Compliance | GB 18401 safety classification with GB/T 29862 fibre labelling; azo dye-free declaration |
| Ship to | Shanghai or Shenzhen (Mainland China) |
What buyers can customise
- Mercerised Finish — available on Brass, quoted per position and per colour.
- Ultrasonic Welding — available on Brass, quoted per position and per colour.
- Knitted Structure — available on Brass, quoted per position and per colour.
- Sewn Edge — available on Brass, quoted per position and per colour.
- Contrast Piping — available on Brass, quoted per position and per colour.
- Felt Blocking — available on Brass, quoted per position and per colour.
- Chenille Patch — available on Brass, quoted per position and per colour.
How we produce it
- Specification review — shape, measurement, material and target price
- Material sourcing and a finished sample in the agreed Brass
- Shape sample with water-repellent finish applied, blocked or knitted to the approved profile
- Wear and wash test on the production material, then pre-production sample
- Bulk production with in-line checks on shape, stitching and trim alignment
- Final AQL 2.5 inspection and packing that protects the shape in transit
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and event channels — logo application and retail packing
- Outdoor and winter programmes — built for the climate it is sold in
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for azo dye-free declaration are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same reproducing a reference sample exactly.
FAQ
How long does sampling take?
A first sample takes 7 working days, and each revision about 5 days.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
Start your fashion hat programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
