Custom Balaclava — Polycarbonate with Sequin Stitching
We supply balaclava to brands, retailers, uniform and promotional programmes, made in Polycarbonate with sequin stitching for denim and workwear programmes. On headwear the specification that decides whether it sells or comes back is fit around the crown, because a mask that rides up is taken off — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 500 pieces per style.
The failures here are predictable: shade variation within one carton, or packing that arrives mixed and unusable on the line. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare REACH and GPSR documentation so the container clears instead of missing the season it was bought for.
Specification
| Product | Balaclava |
|---|---|
| Coverage | full face |
| Type | windproof balaclava |
| Material | Polycarbonate |
| Construction / finish | Sequin Stitching |
| Colour options | 8 shades, Pantone matched |
| Packing | single polybag |
| MOQ | 500 pieces per style |
| Sampling | 10 working days, 3 days per revision |
| Bulk lead time | 25-40 days after approval |
| Compliance | REACH and GPSR documentation; salt spray test for metal finishes |
| Ship to | Rotterdam or Felixstowe (Europe) |
What buyers can customise
- Quilted Lining — available on Polycarbonate, quoted per position and per colour.
- Flat Embroidery — available on Polycarbonate, quoted per position and per colour.
- Rhinestone Setting — available on Polycarbonate, quoted per position and per colour.
- Anti-Pilling Finish — available on Polycarbonate, quoted per position and per colour.
- Hand Braiding — available on Polycarbonate, quoted per position and per colour.
- Embroidery — available on Polycarbonate, quoted per position and per colour.
- Velcro Closure — available on Polycarbonate, quoted per position and per colour.
How we produce it
- Specification review — shape, measurement, material and target price
- Material sourcing and a finished sample in the agreed Polycarbonate
- Shape sample with sequin stitching applied, blocked or knitted to the approved profile
- Wear and wash test on the production material, then pre-production sample
- Bulk production with in-line checks on shape, stitching and trim alignment
- Final AQL 2.5 inspection and packing that protects the shape in transit
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and event channels — logo application and retail packing
- Outdoor and winter programmes — built for the climate it is sold in
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Rotterdam or Felixstowe with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same fit around the crown.
FAQ
How long does sampling take?
A first sample takes 10 working days, and each revision about 3 days.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
What is the minimum order?
Programmes start at 500 pieces per style per finish. Mixed sizes are fine within one style.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Start your balaclava programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
