Custom Thermal Face Mask in Faux Fur with Unstructured Crown for Bridal and Eveningwear Studios

Custom Thermal Face Mask — Faux Fur with Unstructured Crown

We supply thermal face mask to brands, retailers, uniform and promotional programmes, made in Faux Fur with unstructured crown for outerwear and jacket programmes. On headwear the specification that decides whether it sells or comes back is seal at the nose bridge without pressure marks — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 3000 pieces per style.

The failures here are predictable: unclear responsibility when a defect shows up after washing, or a supplier who disappears once the deposit is paid. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• 3D Puff Embroidery — available on Faux Fur, quoted per position and per colour.
• Pantone Colour Matching — available on Faux Fur, quoted per position and per colour.
• Reflective Piping — available on Faux Fur, quoted per position and per colour.
• Rubber Coating — available on Faux Fur, quoted per position and per colour.
• Powder Coating — available on Faux Fur, quoted per position and per colour.
• Yarn Dyeing — available on Faux Fur, quoted per position and per colour.
• Hard Enamel Fill — available on Faux Fur, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Faux Fur
3. Shape sample with unstructured crown applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for azo dye-free declaration are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same seal at the nose bridge without pressure marks.

FAQ

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

What is the minimum order?

Programmes start at 3000 pieces per style per finish. Mixed sizes are fine within one style.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Start your thermal face mask programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.