Custom Thermal Face Mask in Polyethylene (PE) with Braided Weave for Outerwear and Jacket Programmes

Custom Thermal Face Mask — Polyethylene (PE) with Braided Weave

We supply thermal face mask to brands, retailers, uniform and promotional programmes, made in Polyethylene (PE) with braided weave for bridal and eveningwear studios. On headwear the specification that decides whether it sells or comes back is seal at the nose bridge without pressure marks — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 2000 pieces per style.

The failures here are predictable: shade variation within one carton, or a finish that tarnishes or rubs off after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Steam Blocking — available on Polyethylene (PE), quoted per position and per colour.
• Contrast Piping — available on Polyethylene (PE), quoted per position and per colour.
• Fleece Lining — available on Polyethylene (PE), quoted per position and per colour.
• Felt Blocking — available on Polyethylene (PE), quoted per position and per colour.
• Anti-Rust Treatment — available on Polyethylene (PE), quoted per position and per colour.
• Die-Casting — available on Polyethylene (PE), quoted per position and per colour.
• Sandwich Brim — available on Polyethylene (PE), quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Polyethylene (PE)
3. Shape sample with braided weave applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for azo dye-free declaration are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same seal at the nose bridge without pressure marks.

FAQ

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

What is the minimum order?

Programmes start at 2000 pieces per style per finish. Mixed sizes are fine within one style.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Which compliance documents do you provide?

We prepare azo dye-free declaration and the supporting test reports for the destination market.

Start your thermal face mask programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.