Custom Thermal Face Mask in Polypropylene (PP) with Metal Eyelet for Bridal and Eveningwear Studios

Custom Thermal Face Mask — Polypropylene (PP) with Metal Eyelet

We supply thermal face mask to brands, retailers, uniform and promotional programmes, made in Polypropylene (PP) with metal eyelet for bridal and eveningwear studios. On headwear the specification that decides whether it sells or comes back is seal at the nose bridge without pressure marks — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 500 pieces per style.

The failures here are predictable: a finish that tarnishes or rubs off after washing, or a supplier who disappears once the deposit is paid. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare UKCA and REACH documentation so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Water-Repellent Finish — available on Polypropylene (PP), quoted per position and per colour.
• Sewn Edge — available on Polypropylene (PP), quoted per position and per colour.
• 3D Puff Embroidery — available on Polypropylene (PP), quoted per position and per colour.
• Anti-Rust Treatment — available on Polypropylene (PP), quoted per position and per colour.
• Woven Patch — available on Polypropylene (PP), quoted per position and per colour.
• Rhinestone Setting — available on Polypropylene (PP), quoted per position and per colour.
• Rib Knit — available on Polypropylene (PP), quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Polypropylene (PP)
3. Shape sample with metal eyelet applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for CPSIA lead and phthalate testing are prepared for the destination market. We ship to Felixstowe with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same seal at the nose bridge without pressure marks.

FAQ

What is the minimum order?

Programmes start at 500 pieces per style per finish. Mixed sizes are fine within one style.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Which compliance documents do you provide?

We prepare CPSIA lead and phthalate testing and the supporting test reports for the destination market.

Start your thermal face mask programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.