Custom Thermal Face Mask in Coral Fleece with Braided Weave for Uniform and Corporate Programmes

Custom Thermal Face Mask — Coral Fleece with Braided Weave

We supply thermal face mask to brands, retailers, uniform and promotional programmes, made in Coral Fleece with braided weave for e-commerce and small-batch brands. On headwear the specification that decides whether it sells or comes back is seal at the nose bridge without pressure marks — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 500 pieces per style.

The failures here are predictable: a finish that tarnishes or rubs off after washing, or minimum order quantities far above what a growing brand can absorb. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare CPSIA and California Prop 65 compliance so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Pleating — available on Coral Fleece, quoted per position and per colour.
• Moisture-Wicking Finish — available on Coral Fleece, quoted per position and per colour.
• Woven Jacquard — available on Coral Fleece, quoted per position and per colour.
• Unstructured Crown — available on Coral Fleece, quoted per position and per colour.
• Anti-Rust Treatment — available on Coral Fleece, quoted per position and per colour.
• Pantone Colour Matching — available on Coral Fleece, quoted per position and per colour.
• Straw Weaving — available on Coral Fleece, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Coral Fleece
3. Shape sample with braided weave applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Los Angeles or New York with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same seal at the nose bridge without pressure marks.

FAQ

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Start your thermal face mask programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.