Custom Baseball Cap — Polycarbonate with Contrast Piping
We supply baseball cap to brands, retailers, uniform and promotional programmes, made in Polycarbonate with contrast piping for outerwear and jacket programmes. On headwear the specification that decides whether it sells or comes back is brim recovery after packing, tested flat on a table — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 1000 pieces per style.
The failures here are predictable: unclear responsibility when a defect shows up after washing, or colour drift between the approved sample and the bulk trim. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Baseball Cap |
|---|---|
| Panels | 7-panel |
| Closure | snapback closure |
| Material | Polycarbonate |
| Construction / finish | Contrast Piping |
| Colour options | 16 shades, Pantone matched |
| Packing | assorted size pack |
| MOQ | 1000 pieces per style |
| Sampling | 7 working days, 4 days per revision |
| Bulk lead time | 25-30 days after approval |
| Compliance | GB 18401 safety classification with GB/T 29862 fibre labelling; CPSIA lead and phthalate testing |
| Ship to | Shanghai or Shenzhen (Mainland China) |
What buyers can customise
- Debossing — available on Polycarbonate, quoted per position and per colour.
- Knitted Structure — available on Polycarbonate, quoted per position and per colour.
- All-Over Print — available on Polycarbonate, quoted per position and per colour.
- Piece Dyeing — available on Polycarbonate, quoted per position and per colour.
- Sublimation Printing — available on Polycarbonate, quoted per position and per colour.
- Water-Repellent Finish — available on Polycarbonate, quoted per position and per colour.
- Sequin Stitching — available on Polycarbonate, quoted per position and per colour.
How we produce it
- Specification review — shape, measurement, material and target price
- Material sourcing and a finished sample in the agreed Polycarbonate
- Shape sample with contrast piping applied, blocked or knitted to the approved profile
- Wear and wash test on the production material, then pre-production sample
- Bulk production with in-line checks on shape, stitching and trim alignment
- Final AQL 2.5 inspection and packing that protects the shape in transit
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and event channels — logo application and retail packing
- Outdoor and winter programmes — built for the climate it is sold in
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for CPSIA lead and phthalate testing are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same brim recovery after packing.
FAQ
How long does sampling take?
A first sample takes 7 working days, and each revision about 4 days.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
Start your baseball cap programme
Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.
