Custom Festive & Party Hat in Spandex Blend with Sandwich Brim for Childrenswear and Schoolwear

Custom Festive & Party Hat — Spandex Blend with Sandwich Brim

We supply festive & party hat to brands, retailers, uniform and promotional programmes, made in Spandex Blend with sandwich brim for uniform and corporate programmes. On headwear the specification that decides whether it sells or comes back is glued and stitched components that do not fall off in the bag — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 500 pieces per style.

The failures here are predictable: shade variation within one carton, or unclear responsibility when a defect shows up after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Curved Brim — available on Spandex Blend, quoted per position and per colour.
• Unstructured Crown — available on Spandex Blend, quoted per position and per colour.
• Metal Buckle Strap — available on Spandex Blend, quoted per position and per colour.
• Fringe Finish — available on Spandex Blend, quoted per position and per colour.
• Shapeable Edge — available on Spandex Blend, quoted per position and per colour.
• Quilted Lining — available on Spandex Blend, quoted per position and per colour.
• Flat Brim — available on Spandex Blend, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Spandex Blend
3. Shape sample with sandwich brim applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same glued and stitched components that do not fall off in the bag.

FAQ

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

How long does sampling take?

A first sample takes 12 working days, and each revision about 3 days.

What is the minimum order?

Programmes start at 500 pieces per style per finish. Mixed sizes are fine within one style.

Start your festive & party hat programme

Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.