Custom Hat, Scarf & Glove Set in Genuine Leather with Braided Weave for Childrenswear and Schoolwear

Custom Hat, Scarf & Glove Set — Genuine Leather with Braided Weave

We supply hat, scarf & glove set to brands, retailers, uniform and promotional programmes, made in Genuine Leather with braided weave for denim and workwear programmes. On headwear the specification that decides whether it sells or comes back is shade match across three different pieces, which is the failure customers notice — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 3000 pieces per style.

The failures here are predictable: packing that arrives mixed and unusable on the line, or unclear responsibility when a defect shows up after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GSO conformity with Arabic labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Tassel Finish — available on Genuine Leather, quoted per position and per colour.
• Powder Coating — available on Genuine Leather, quoted per position and per colour.
• Snapback Closure — available on Genuine Leather, quoted per position and per colour.
• Water-Repellent Finish — available on Genuine Leather, quoted per position and per colour.
• Metal Eyelet — available on Genuine Leather, quoted per position and per colour.
• Pleating — available on Genuine Leather, quoted per position and per colour.
• Stamping — available on Genuine Leather, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Genuine Leather
3. Shape sample with braided weave applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Jebel Ali with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same shade match across three different pieces.

FAQ

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Which compliance documents do you provide?

We prepare OEKO-TEX Standard 100 for dyes and trims and the supporting test reports for the destination market.

What is the minimum order?

Programmes start at 3000 pieces per style per finish. Mixed sizes are fine within one style.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Start your hat, scarf & glove set programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.