Custom Beanie — Sequin Fabric with Embroidery
We supply beanie to brands, retailers, uniform and promotional programmes, made in Sequin Fabric with embroidery for denim and workwear programmes. On headwear the specification that decides whether it sells or comes back is recovery after wear, because a beanie that bags out is dead — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 3000 pieces per style.
The failures here are predictable: packing that arrives mixed and unusable on the line, or unclear responsibility when a defect shows up after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GSO conformity with Arabic labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Beanie |
|---|---|
| Length | short beanie |
| Knit | double-layer knit |
| Material | Sequin Fabric |
| Construction / finish | Embroidery |
| Colour options | 24 shades, Pantone matched |
| Packing | shape-protected carton |
| MOQ | 3000 pieces per style |
| Sampling | 12 working days, 5 days per revision |
| Bulk lead time | 20-30 days after approval |
| Compliance | GSO conformity with Arabic labelling; OEKO-TEX Standard 100 for dyes and trims |
| Ship to | Jebel Ali (the Middle East) |
What buyers can customise
- Tassel Finish — available on Sequin Fabric, quoted per position and per colour.
- Powder Coating — available on Sequin Fabric, quoted per position and per colour.
- Snapback Closure — available on Sequin Fabric, quoted per position and per colour.
- Water-Repellent Finish — available on Sequin Fabric, quoted per position and per colour.
- Metal Eyelet — available on Sequin Fabric, quoted per position and per colour.
- Pleating — available on Sequin Fabric, quoted per position and per colour.
- Stamping — available on Sequin Fabric, quoted per position and per colour.
How we produce it
- Specification review — shape, measurement, material and target price
- Material sourcing and a finished sample in the agreed Sequin Fabric
- Shape sample with embroidery applied, blocked or knitted to the approved profile
- Wear and wash test on the production material, then pre-production sample
- Bulk production with in-line checks on shape, stitching and trim alignment
- Final AQL 2.5 inspection and packing that protects the shape in transit
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and event channels — logo application and retail packing
- Outdoor and winter programmes — built for the climate it is sold in
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Jebel Ali with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same recovery after wear.
FAQ
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Which compliance documents do you provide?
We prepare OEKO-TEX Standard 100 for dyes and trims and the supporting test reports for the destination market.
What is the minimum order?
Programmes start at 3000 pieces per style per finish. Mixed sizes are fine within one style.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Start your beanie programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
