Custom Hat, Scarf & Glove Set in Polyethylene (PE) with Soft Enamel Fill for Outerwear and Jacket Programmes

Custom Hat, Scarf & Glove Set — Polyethylene (PE) with Soft Enamel Fill

We supply hat, scarf & glove set to brands, retailers, uniform and promotional programmes, made in Polyethylene (PE) with soft enamel fill for e-commerce and small-batch brands. On headwear the specification that decides whether it sells or comes back is shade match across three different pieces, which is the failure customers notice — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 2000 pieces per style.

The failures here are predictable: unclear responsibility when a defect shows up after washing, or minimum order quantities far above what a growing brand can absorb. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Piece Dyeing — available on Polyethylene (PE), quoted per position and per colour.
• Packable Crushable Finish — available on Polyethylene (PE), quoted per position and per colour.
• Unstructured Crown — available on Polyethylene (PE), quoted per position and per colour.
• Crochet — available on Polyethylene (PE), quoted per position and per colour.
• Hand Braiding — available on Polyethylene (PE), quoted per position and per colour.
• Contrast Piping — available on Polyethylene (PE), quoted per position and per colour.
• Waffle Knit — available on Polyethylene (PE), quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Polyethylene (PE)
3. Shape sample with soft enamel fill applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for azo dye-free declaration are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same shade match across three different pieces.

FAQ

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

How long does sampling take?

A first sample takes 7 working days, and each revision about 5 days.

Start your hat, scarf & glove set programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.