Custom Beanie in Recycled PET Fabric with Anti-Rust Treatment for Denim and Workwear Programmes

Custom Beanie — Recycled PET Fabric with Anti-Rust Treatment

We supply beanie to brands, retailers, uniform and promotional programmes, made in Recycled PET Fabric with anti-rust treatment for outerwear and jacket programmes. On headwear the specification that decides whether it sells or comes back is recovery after wear, because a beanie that bags out is dead — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 3000 pieces per style.

The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or shade variation within one carton. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Metal Buckle Strap — available on Recycled PET Fabric, quoted per position and per colour.
• Rope Trim — available on Recycled PET Fabric, quoted per position and per colour.
• Curved Brim — available on Recycled PET Fabric, quoted per position and per colour.
• Flat Embroidery — available on Recycled PET Fabric, quoted per position and per colour.
• Pantone Colour Matching — available on Recycled PET Fabric, quoted per position and per colour.
• Hand Braiding — available on Recycled PET Fabric, quoted per position and per colour.
• Hard Enamel Fill — available on Recycled PET Fabric, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Recycled PET Fabric
3. Shape sample with anti-rust treatment applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for REACH nickel-release test for metal findings are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same recovery after wear.

FAQ

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

How long does sampling take?

A first sample takes 10 working days, and each revision about 4 days.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Which compliance documents do you provide?

We prepare REACH nickel-release test for metal findings and the supporting test reports for the destination market.

Start your beanie programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.