Custom Hat, Scarf & Glove Set in Sherpa Fleece with Anti-UV Finish for Denim and Workwear Programmes

Custom Hat, Scarf & Glove Set — Sherpa Fleece with Anti-UV Finish

We supply hat, scarf & glove set to brands, retailers, uniform and promotional programmes, made in Sherpa Fleece with anti-uv finish for e-commerce and small-batch brands. On headwear the specification that decides whether it sells or comes back is pairing and packing, so sets arrive complete and correctly sized — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 2000 pieces per style.

The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or a finish that tarnishes or rubs off after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare REACH and GPSR documentation so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Fringe Finish — available on Sherpa Fleece, quoted per position and per colour.
• Paint Spray — available on Sherpa Fleece, quoted per position and per colour.
• 3D Puff Embroidery — available on Sherpa Fleece, quoted per position and per colour.
• Elastic Sweatband — available on Sherpa Fleece, quoted per position and per colour.
• Fleece Lining — available on Sherpa Fleece, quoted per position and per colour.
• Flat Embroidery — available on Sherpa Fleece, quoted per position and per colour.
• Unstructured Crown — available on Sherpa Fleece, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Sherpa Fleece
3. Shape sample with anti-uv finish applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for CPSIA lead and phthalate testing are prepared for the destination market. We ship to Rotterdam or Felixstowe with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same pairing and packing.

FAQ

What is the minimum order?

Programmes start at 2000 pieces per style per finish. Mixed sizes are fine within one style.

Which compliance documents do you provide?

We prepare CPSIA lead and phthalate testing and the supporting test reports for the destination market.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Start your hat, scarf & glove set programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.