Custom Beanie in Sequin Fabric with Contrast Piping for Childrenswear and Schoolwear

Custom Beanie — Sequin Fabric with Contrast Piping

We supply beanie to brands, retailers, uniform and promotional programmes, made in Sequin Fabric with contrast piping for bridal and eveningwear studios. On headwear the specification that decides whether it sells or comes back is warmth for the weight, which is what the customer judges in store — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 1000 pieces per style.

The failures here are predictable: packing that arrives mixed and unusable on the line, or colour drift between the approved sample and the bulk trim. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Embroidered Patch — available on Sequin Fabric, quoted per position and per colour.
• Rhinestone Setting — available on Sequin Fabric, quoted per position and per colour.
• Water-Repellent Finish — available on Sequin Fabric, quoted per position and per colour.
• Flat Embroidery — available on Sequin Fabric, quoted per position and per colour.
• Soft Enamel Fill — available on Sequin Fabric, quoted per position and per colour.
• Fleece Lining — available on Sequin Fabric, quoted per position and per colour.
• Piece Dyeing — available on Sequin Fabric, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Sequin Fabric
3. Shape sample with contrast piping applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for REACH nickel-release test for metal findings are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same warmth for the weight.

FAQ

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Which compliance documents do you provide?

We prepare REACH nickel-release test for metal findings and the supporting test reports for the destination market.

What is the minimum order?

Programmes start at 1000 pieces per style per finish. Mixed sizes are fine within one style.

Start your beanie programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.