Custom Fedora — Tulle with Flat Brim
We supply fedora to brands, retailers, uniform and promotional programmes, made in Tulle with flat brim for childrenswear and schoolwear. On headwear the specification that decides whether it sells or comes back is felt body blocking, which sets the crown lines permanently — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 1000 pieces per style.
The failures here are predictable: packing that arrives mixed and unusable on the line, or shade variation within one carton. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare CPSIA and California Prop 65 compliance so the container clears instead of missing the season it was bought for.
Specification
| Product | Fedora |
|---|---|
| Brim | 8 cm brim |
| Type | fur felt fedora |
| Material | Tulle |
| Construction / finish | Flat Brim |
| Colour options | 6 shades, Pantone matched |
| Packing | assorted size pack |
| MOQ | 1000 pieces per style |
| Sampling | 7 working days, 3 days per revision |
| Bulk lead time | 25-30 days after approval |
| Compliance | CPSIA and California Prop 65 compliance; EN 71 part 3 for decorative components |
| Ship to | Los Angeles or New York (North America) |
What buyers can customise
- Wire Brim — available on Tulle, quoted per position and per colour.
- Hard Enamel Fill — available on Tulle, quoted per position and per colour.
- Quilted Lining — available on Tulle, quoted per position and per colour.
- Intarsia Knit — available on Tulle, quoted per position and per colour.
- Contrast Piping — available on Tulle, quoted per position and per colour.
- Heat-Cut Edge — available on Tulle, quoted per position and per colour.
- Paint Spray — available on Tulle, quoted per position and per colour.
How we produce it
- Specification review — shape, measurement, material and target price
- Material sourcing and a finished sample in the agreed Tulle
- Shape sample with flat brim applied, blocked or knitted to the approved profile
- Wear and wash test on the production material, then pre-production sample
- Bulk production with in-line checks on shape, stitching and trim alignment
- Final AQL 2.5 inspection and packing that protects the shape in transit
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and event channels — logo application and retail packing
- Outdoor and winter programmes — built for the climate it is sold in
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Los Angeles or New York with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same felt body blocking.
FAQ
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
How long does sampling take?
A first sample takes 7 working days, and each revision about 3 days.
What is the minimum order?
Programmes start at 1000 pieces per style per finish. Mixed sizes are fine within one style.
Start your fedora programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
