Custom Peaked Cap — Terry Cloth with Soft Enamel Fill
We supply peaked cap to brands, retailers, uniform and promotional programmes, made in Terry Cloth with soft enamel fill for bridal and eveningwear studios. On headwear the specification that decides whether it sells or comes back is panel tension on the structured front — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 500 pieces per style.
The failures here are predictable: unclear responsibility when a defect shows up after washing, or minimum order quantities far above what a growing brand can absorb. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare REACH and GPSR documentation so the container clears instead of missing the season it was bought for.
Specification
| Product | Peaked Cap |
|---|---|
| Brim | 6.5 cm flat brim |
| Type | fitted peaked cap |
| Material | Terry Cloth |
| Construction / finish | Soft Enamel Fill |
| Colour options | 8 shades, Pantone matched |
| Packing | shape-protected carton |
| MOQ | 500 pieces per style |
| Sampling | 7 working days, 3 days per revision |
| Bulk lead time | 20-55 days after approval |
| Compliance | REACH and GPSR documentation; salt spray test for metal finishes |
| Ship to | Rotterdam or Felixstowe (Europe) |
What buyers can customise
- Elastic Sweatband — available on Terry Cloth, quoted per position and per colour.
- Wire Brim — available on Terry Cloth, quoted per position and per colour.
- Leather Patch — available on Terry Cloth, quoted per position and per colour.
- Overlocked Edge — available on Terry Cloth, quoted per position and per colour.
- Shapeable Edge — available on Terry Cloth, quoted per position and per colour.
- Epoxy Dome — available on Terry Cloth, quoted per position and per colour.
- Anti-Pilling Finish — available on Terry Cloth, quoted per position and per colour.
How we produce it
- Specification review — shape, measurement, material and target price
- Material sourcing and a finished sample in the agreed Terry Cloth
- Shape sample with soft enamel fill applied, blocked or knitted to the approved profile
- Wear and wash test on the production material, then pre-production sample
- Bulk production with in-line checks on shape, stitching and trim alignment
- Final AQL 2.5 inspection and packing that protects the shape in transit
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and event channels — logo application and retail packing
- Outdoor and winter programmes — built for the climate it is sold in
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Rotterdam or Felixstowe with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same panel tension on the structured front.
FAQ
What is the minimum order?
Programmes start at 500 pieces per style per finish. Mixed sizes are fine within one style.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
Which compliance documents do you provide?
We prepare salt spray test for metal finishes and the supporting test reports for the destination market.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
Start your peaked cap programme
Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.
