Custom Beret in Wheat Straw Braid with Edge Binding for Bridal and Eveningwear Studios

Custom Beret — Wheat Straw Braid with Edge Binding

We supply beret to brands, retailers, uniform and promotional programmes, made in Wheat Straw Braid with edge binding for denim and workwear programmes. On headwear the specification that decides whether it sells or comes back is shape retention after blocking, so it sits correctly on the head — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 300 pieces per style.

The failures here are predictable: unclear responsibility when a defect shows up after washing, or inconsistent sizing between production runs. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• 3D Puff Embroidery — available on Wheat Straw Braid, quoted per position and per colour.
• Water-Repellent Finish — available on Wheat Straw Braid, quoted per position and per colour.
• Elastic Sweatband — available on Wheat Straw Braid, quoted per position and per colour.
• Soft Enamel Fill — available on Wheat Straw Braid, quoted per position and per colour.
• Knitted Structure — available on Wheat Straw Braid, quoted per position and per colour.
• Straw Weaving — available on Wheat Straw Braid, quoted per position and per colour.
• Anti-Rust Treatment — available on Wheat Straw Braid, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Wheat Straw Braid
3. Shape sample with edge binding applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for CPSIA lead and phthalate testing are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same shape retention after blocking.

FAQ

How long does sampling take?

A first sample takes 12 working days, and each revision about 4 days.

Which compliance documents do you provide?

We prepare CPSIA lead and phthalate testing and the supporting test reports for the destination market.

What is the minimum order?

Programmes start at 300 pieces per style per finish. Mixed sizes are fine within one style.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Start your beret programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.