Custom Peaked Cap in Lambswool Yarn with Paint Spray for Bridal and Eveningwear Studios

Custom Peaked Cap — Lambswool Yarn with Paint Spray

We supply peaked cap to brands, retailers, uniform and promotional programmes, made in Lambswool Yarn with paint spray for uniform and corporate programmes. On headwear the specification that decides whether it sells or comes back is brim flatness, because a wavy brim is returned immediately — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 3000 pieces per style.

The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or packing that arrives mixed and unusable on the line. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare CPSIA and California Prop 65 compliance so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Stamping — available on Lambswool Yarn, quoted per position and per colour.
• Sewn Edge — available on Lambswool Yarn, quoted per position and per colour.
• Edge Binding — available on Lambswool Yarn, quoted per position and per colour.
• Fringe Finish — available on Lambswool Yarn, quoted per position and per colour.
• Structured Front Panel — available on Lambswool Yarn, quoted per position and per colour.
• Laser Engraving — available on Lambswool Yarn, quoted per position and per colour.
• Unstructured Crown — available on Lambswool Yarn, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Lambswool Yarn
3. Shape sample with paint spray applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for colour fastness to washing, rubbing and light are prepared for the destination market. We ship to Los Angeles or New York with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same brim flatness.

FAQ

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Start your peaked cap programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.