Custom Peaked Cap in Polyethylene (PE) with Water-Repellent Finish for Denim and Workwear Programmes

Custom Peaked Cap — Polyethylene (PE) with Water-Repellent Finish

We supply peaked cap to brands, retailers, uniform and promotional programmes, made in Polyethylene (PE) with water-repellent finish for denim and workwear programmes. On headwear the specification that decides whether it sells or comes back is panel tension on the structured front — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 300 pieces per style.

The failures here are predictable: packing that arrives mixed and unusable on the line, or a finish that tarnishes or rubs off after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Felt Blocking — available on Polyethylene (PE), quoted per position and per colour.
• Placement Print — available on Polyethylene (PE), quoted per position and per colour.
• Soft Enamel Fill — available on Polyethylene (PE), quoted per position and per colour.
• Unstructured Crown — available on Polyethylene (PE), quoted per position and per colour.
• Hard Enamel Fill — available on Polyethylene (PE), quoted per position and per colour.
• Ultrasonic Welding — available on Polyethylene (PE), quoted per position and per colour.
• Injection Moulding — available on Polyethylene (PE), quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Polyethylene (PE)
3. Shape sample with water-repellent finish applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same panel tension on the structured front.

FAQ

Which compliance documents do you provide?

We prepare salt spray test for metal finishes and the supporting test reports for the destination market.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

What is the minimum order?

Programmes start at 300 pieces per style per finish. Mixed sizes are fine within one style.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Start your peaked cap programme

Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.