Custom Beret — Wood with Rhinestone Setting
We supply beret to brands, retailers, uniform and promotional programmes, made in Wood with rhinestone setting for bridal and eveningwear studios. On headwear the specification that decides whether it sells or comes back is colour fastness, because dark berets bleed onto light collars — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 500 pieces per style.
The failures here are predictable: colour drift between the approved sample and the bulk trim, or packing that arrives mixed and unusable on the line. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare UKCA and REACH documentation so the container clears instead of missing the season it was bought for.
Specification
| Product | Beret |
|---|---|
| Diameter | 30 cm |
| Type | wool felt beret |
| Material | Wood |
| Construction / finish | Rhinestone Setting |
| Colour options | 6 shades, Pantone matched |
| Packing | bulk carton |
| MOQ | 500 pieces per style |
| Sampling | 7 working days, 3 days per revision |
| Bulk lead time | 20-30 days after approval |
| Compliance | UKCA and REACH documentation; colour fastness to washing, rubbing and light |
| Ship to | Felixstowe (the United Kingdom) |
What buyers can customise
- Structured Front Panel — available on Wood, quoted per position and per colour.
- Cable Knit — available on Wood, quoted per position and per colour.
- Flat Embroidery — available on Wood, quoted per position and per colour.
- Rhinestone Setting — available on Wood, quoted per position and per colour.
- Woven Jacquard — available on Wood, quoted per position and per colour.
- Packable Crushable Finish — available on Wood, quoted per position and per colour.
- Flat Brim — available on Wood, quoted per position and per colour.
How we produce it
- Specification review — shape, measurement, material and target price
- Material sourcing and a finished sample in the agreed Wood
- Shape sample with rhinestone setting applied, blocked or knitted to the approved profile
- Wear and wash test on the production material, then pre-production sample
- Bulk production with in-line checks on shape, stitching and trim alignment
- Final AQL 2.5 inspection and packing that protects the shape in transit
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and event channels — logo application and retail packing
- Outdoor and winter programmes — built for the climate it is sold in
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for colour fastness to washing, rubbing and light are prepared for the destination market. We ship to Felixstowe with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same colour fastness.
FAQ
How long does sampling take?
A first sample takes 7 working days, and each revision about 3 days.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Start your beret programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
