Custom Beret — Satin with Woven Jacquard
We supply beret to brands, retailers, uniform and promotional programmes, made in Satin with woven jacquard for childrenswear and schoolwear. On headwear the specification that decides whether it sells or comes back is shape retention after blocking, so it sits correctly on the head — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 500 pieces per style.
The failures here are predictable: a finish that tarnishes or rubs off after washing, or minimum order quantities far above what a growing brand can absorb. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.
Specification
| Product | Beret |
|---|---|
| Diameter | 30 cm |
| Type | artist beret |
| Material | Satin |
| Construction / finish | Woven Jacquard |
| Colour options | 8 shades, Pantone matched |
| Packing | shape-protected carton |
| MOQ | 500 pieces per style |
| Sampling | 7 working days, 5 days per revision |
| Bulk lead time | 25-55 days after approval |
| Compliance | SNI or SIRIM documentation per destination; CPSIA lead and phthalate testing |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Contrast Piping — available on Satin, quoted per position and per colour.
- Fleece Lining — available on Satin, quoted per position and per colour.
- Embroidery — available on Satin, quoted per position and per colour.
- Injection Moulding — available on Satin, quoted per position and per colour.
- Beaded Detail — available on Satin, quoted per position and per colour.
- Curved Brim — available on Satin, quoted per position and per colour.
- Moisture-Wicking Finish — available on Satin, quoted per position and per colour.
How we produce it
- Specification review — shape, measurement, material and target price
- Material sourcing and a finished sample in the agreed Satin
- Shape sample with woven jacquard applied, blocked or knitted to the approved profile
- Wear and wash test on the production material, then pre-production sample
- Bulk production with in-line checks on shape, stitching and trim alignment
- Final AQL 2.5 inspection and packing that protects the shape in transit
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and event channels — logo application and retail packing
- Outdoor and winter programmes — built for the climate it is sold in
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for CPSIA lead and phthalate testing are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same shape retention after blocking.
FAQ
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Which compliance documents do you provide?
We prepare CPSIA lead and phthalate testing and the supporting test reports for the destination market.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Start your beret programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
