Custom Formal Hat — Mesh with Beaded Detail
We supply formal hat to brands, retailers, uniform and promotional programmes, made in Mesh with beaded detail for childrenswear and schoolwear. On headwear the specification that decides whether it sells or comes back is grosgrain ribbon lustre and edge — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 500 pieces per style.
The failures here are predictable: inconsistent sizing between production runs, or packing that arrives mixed and unusable on the line. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Formal Hat |
|---|---|
| Crown height | 13 cm |
| Type | morning dress hat |
| Material | Mesh |
| Construction / finish | Beaded Detail |
| Colour options | 8 shades, Pantone matched |
| Packing | shape-protected carton |
| MOQ | 500 pieces per style |
| Sampling | 14 working days, 5 days per revision |
| Bulk lead time | 15-30 days after approval |
| Compliance | GB 18401 safety classification with GB/T 29862 fibre labelling; salt spray test for metal finishes |
| Ship to | Shanghai or Shenzhen (Mainland China) |
What buyers can customise
- Hard Enamel Fill — available on Mesh, quoted per position and per colour.
- Reflective Piping — available on Mesh, quoted per position and per colour.
- Cable Knit — available on Mesh, quoted per position and per colour.
- Beaded Detail — available on Mesh, quoted per position and per colour.
- Knitted Structure — available on Mesh, quoted per position and per colour.
- Anti-UV Finish — available on Mesh, quoted per position and per colour.
- Woven Patch — available on Mesh, quoted per position and per colour.
How we produce it
- Specification review — shape, measurement, material and target price
- Material sourcing and a finished sample in the agreed Mesh
- Shape sample with beaded detail applied, blocked or knitted to the approved profile
- Wear and wash test on the production material, then pre-production sample
- Bulk production with in-line checks on shape, stitching and trim alignment
- Final AQL 2.5 inspection and packing that protects the shape in transit
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and event channels — logo application and retail packing
- Outdoor and winter programmes — built for the climate it is sold in
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same grosgrain ribbon lustre and edge.
FAQ
Which compliance documents do you provide?
We prepare salt spray test for metal finishes and the supporting test reports for the destination market.
What is the minimum order?
Programmes start at 500 pieces per style per finish. Mixed sizes are fine within one style.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Start your formal hat programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
