Custom Beret — Satin with Powder Coating
We supply beret to brands, retailers, uniform and promotional programmes, made in Satin with powder coating for outerwear and jacket programmes. On headwear the specification that decides whether it sells or comes back is colour fastness, because dark berets bleed onto light collars — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 3000 pieces per style.
The failures here are predictable: colour drift between the approved sample and the bulk trim, or a finish that tarnishes or rubs off after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Beret |
|---|---|
| Diameter | 26 cm |
| Type | artist beret |
| Material | Satin |
| Construction / finish | Powder Coating |
| Colour options | 16 shades, Pantone matched |
| Packing | bulk carton |
| MOQ | 3000 pieces per style |
| Sampling | 14 working days, 4 days per revision |
| Bulk lead time | 15-30 days after approval |
| Compliance | GB 18401 safety classification with GB/T 29862 fibre labelling; salt spray test for metal finishes |
| Ship to | Shanghai or Shenzhen (Mainland China) |
What buyers can customise
- Contrast Piping — available on Satin, quoted per position and per colour.
- Curved Brim — available on Satin, quoted per position and per colour.
- Woven Jacquard — available on Satin, quoted per position and per colour.
- Metal Buckle Strap — available on Satin, quoted per position and per colour.
- Distressed Wash — available on Satin, quoted per position and per colour.
- Flat Embroidery — available on Satin, quoted per position and per colour.
- Piece Dyeing — available on Satin, quoted per position and per colour.
How we produce it
- Specification review — shape, measurement, material and target price
- Material sourcing and a finished sample in the agreed Satin
- Shape sample with powder coating applied, blocked or knitted to the approved profile
- Wear and wash test on the production material, then pre-production sample
- Bulk production with in-line checks on shape, stitching and trim alignment
- Final AQL 2.5 inspection and packing that protects the shape in transit
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and event channels — logo application and retail packing
- Outdoor and winter programmes — built for the climate it is sold in
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same colour fastness.
FAQ
Which compliance documents do you provide?
We prepare salt spray test for metal finishes and the supporting test reports for the destination market.
How long does sampling take?
A first sample takes 14 working days, and each revision about 4 days.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
Start your beret programme
Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.
