Custom Peaked Cap in Organza with Water-Repellent Finish for Childrenswear and Schoolwear

Custom Peaked Cap — Organza with Water-Repellent Finish

We supply peaked cap to brands, retailers, uniform and promotional programmes, made in Organza with water-repellent finish for childrenswear and schoolwear. On headwear the specification that decides whether it sells or comes back is embroidery or patch position measured from the brim seam — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 500 pieces per style.

The failures here are predictable: shade variation within one carton, or unclear responsibility when a defect shows up after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare CPSIA and California Prop 65 compliance so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Die-Casting — available on Organza, quoted per position and per colour.
• Overlocked Edge — available on Organza, quoted per position and per colour.
• UV Printing — available on Organza, quoted per position and per colour.
• Elastic Sweatband — available on Organza, quoted per position and per colour.
• Shapeable Edge — available on Organza, quoted per position and per colour.
• Laser Engraving — available on Organza, quoted per position and per colour.
• Anti-Pilling Finish — available on Organza, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Organza
3. Shape sample with water-repellent finish applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Los Angeles or New York with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same embroidery or patch position measured from the brim seam.

FAQ

How long does sampling take?

A first sample takes 14 working days, and each revision about 5 days.

Which compliance documents do you provide?

We prepare OEKO-TEX Standard 100 for dyes and trims and the supporting test reports for the destination market.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Start your peaked cap programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.