Custom Peaked Cap — PU Leather with Screen Printing
We supply peaked cap to brands, retailers, uniform and promotional programmes, made in PU Leather with screen printing for childrenswear and schoolwear. On headwear the specification that decides whether it sells or comes back is brim flatness, because a wavy brim is returned immediately — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 300 pieces per style.
The failures here are predictable: colour drift between the approved sample and the bulk trim, or minimum order quantities far above what a growing brand can absorb. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare CPSIA and California Prop 65 compliance so the container clears instead of missing the season it was bought for.
Specification
| Product | Peaked Cap |
|---|---|
| Brim | 7 cm flat brim |
| Type | wool peaked cap |
| Material | PU Leather |
| Construction / finish | Screen Printing |
| Colour options | 24 shades, Pantone matched |
| Packing | shape-protected carton |
| MOQ | 300 pieces per style |
| Sampling | 14 working days, 3 days per revision |
| Bulk lead time | 15-30 days after approval |
| Compliance | CPSIA and California Prop 65 compliance; GRS recycled content claim |
| Ship to | Los Angeles or New York (North America) |
What buyers can customise
- Steam Blocking — available on PU Leather, quoted per position and per colour.
- Die-Casting — available on PU Leather, quoted per position and per colour.
- Pantone Colour Matching — available on PU Leather, quoted per position and per colour.
- Debossing — available on PU Leather, quoted per position and per colour.
- Heat Transfer Printing — available on PU Leather, quoted per position and per colour.
- Reflective Piping — available on PU Leather, quoted per position and per colour.
- Powder Coating — available on PU Leather, quoted per position and per colour.
How we produce it
- Specification review — shape, measurement, material and target price
- Material sourcing and a finished sample in the agreed PU Leather
- Shape sample with screen printing applied, blocked or knitted to the approved profile
- Wear and wash test on the production material, then pre-production sample
- Bulk production with in-line checks on shape, stitching and trim alignment
- Final AQL 2.5 inspection and packing that protects the shape in transit
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and event channels — logo application and retail packing
- Outdoor and winter programmes — built for the climate it is sold in
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for GRS recycled content claim are prepared for the destination market. We ship to Los Angeles or New York with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same brim flatness.
FAQ
What is the minimum order?
Programmes start at 300 pieces per style per finish. Mixed sizes are fine within one style.
How long does sampling take?
A first sample takes 14 working days, and each revision about 3 days.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
Start your peaked cap programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
