Custom Dad Hat in Cotton Yarn with Placement Print for Bridal and Eveningwear Studios

Custom Dad Hat — Cotton Yarn with Placement Print

We supply dad hat to brands, retailers, uniform and promotional programmes, made in Cotton Yarn with placement print for denim and workwear programmes. On headwear the specification that decides whether it sells or comes back is soft crown collapse, which is the point of the style but must be controlled — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 300 pieces per style.

The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or a supplier who disappears once the deposit is paid. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare REACH and GPSR documentation so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Metal Buckle Strap — available on Cotton Yarn, quoted per position and per colour.
• Pantone Colour Matching — available on Cotton Yarn, quoted per position and per colour.
• Structured Front Panel — available on Cotton Yarn, quoted per position and per colour.
• Snapback Closure — available on Cotton Yarn, quoted per position and per colour.
• 3D Puff Embroidery — available on Cotton Yarn, quoted per position and per colour.
• Metal Eyelet — available on Cotton Yarn, quoted per position and per colour.
• Anti-Pilling Finish — available on Cotton Yarn, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Cotton Yarn
3. Shape sample with placement print applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Rotterdam or Felixstowe with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same soft crown collapse.

FAQ

How long does sampling take?

A first sample takes 14 working days, and each revision about 4 days.

Which compliance documents do you provide?

We prepare EN 71 part 3 for decorative components and the supporting test reports for the destination market.

What is the minimum order?

Programmes start at 300 pieces per style per finish. Mixed sizes are fine within one style.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Start your dad hat programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.