Custom Dad Hat — Polar Fleece with Flat Embroidery
We supply dad hat to brands, retailers, uniform and promotional programmes, made in Polar Fleece with flat embroidery for uniform and corporate programmes. On headwear the specification that decides whether it sells or comes back is embroidery density on washed cotton, which puckers if it is wrong — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 500 pieces per style.
The failures here are predictable: colour drift between the approved sample and the bulk trim, or minimum order quantities far above what a growing brand can absorb. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.
Specification
| Product | Dad Hat |
|---|---|
| Profile | unstructured crown |
| Wash | raw unwashed |
| Material | Polar Fleece |
| Construction / finish | Flat Embroidery |
| Colour options | 6 shades, Pantone matched |
| Packing | single polybag |
| MOQ | 500 pieces per style |
| Sampling | 14 working days, 4 days per revision |
| Bulk lead time | 15-30 days after approval |
| Compliance | SNI or SIRIM documentation per destination; OEKO-TEX Standard 100 for dyes and trims |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Embossing — available on Polar Fleece, quoted per position and per colour.
- Rubber Coating — available on Polar Fleece, quoted per position and per colour.
- Overlocked Edge — available on Polar Fleece, quoted per position and per colour.
- Injection Moulding — available on Polar Fleece, quoted per position and per colour.
- Chenille Patch — available on Polar Fleece, quoted per position and per colour.
- Unstructured Crown — available on Polar Fleece, quoted per position and per colour.
- Pantone Colour Matching — available on Polar Fleece, quoted per position and per colour.
How we produce it
- Specification review — shape, measurement, material and target price
- Material sourcing and a finished sample in the agreed Polar Fleece
- Shape sample with flat embroidery applied, blocked or knitted to the approved profile
- Wear and wash test on the production material, then pre-production sample
- Bulk production with in-line checks on shape, stitching and trim alignment
- Final AQL 2.5 inspection and packing that protects the shape in transit
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and event channels — logo application and retail packing
- Outdoor and winter programmes — built for the climate it is sold in
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same embroidery density on washed cotton.
FAQ
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
How long does sampling take?
A first sample takes 14 working days, and each revision about 4 days.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Start your dad hat programme
Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.
