Custom Peaked Cap in Foam Front Panel with Screen Printing for Outerwear and Jacket Programmes

Custom Peaked Cap — Foam Front Panel with Screen Printing

We supply peaked cap to brands, retailers, uniform and promotional programmes, made in Foam Front Panel with screen printing for childrenswear and schoolwear. On headwear the specification that decides whether it sells or comes back is brim flatness, because a wavy brim is returned immediately — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 500 pieces per style.

The failures here are predictable: packing that arrives mixed and unusable on the line, or inconsistent sizing between production runs. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Fringe Finish — available on Foam Front Panel, quoted per position and per colour.
• Debossing — available on Foam Front Panel, quoted per position and per colour.
• Anti-Pilling Finish — available on Foam Front Panel, quoted per position and per colour.
• Embroidered Patch — available on Foam Front Panel, quoted per position and per colour.
• Woven Patch — available on Foam Front Panel, quoted per position and per colour.
• All-Over Print — available on Foam Front Panel, quoted per position and per colour.
• Hot Foil Stamping — available on Foam Front Panel, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Foam Front Panel
3. Shape sample with screen printing applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for colour fastness to washing, rubbing and light are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same brim flatness.

FAQ

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Which compliance documents do you provide?

We prepare colour fastness to washing, rubbing and light and the supporting test reports for the destination market.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Start your peaked cap programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.