Custom Dad Hat in Felt with Steam Blocking for Childrenswear and Schoolwear

Custom Dad Hat — Felt with Steam Blocking

We supply dad hat to brands, retailers, uniform and promotional programmes, made in Felt with steam blocking for denim and workwear programmes. On headwear the specification that decides whether it sells or comes back is soft crown collapse, which is the point of the style but must be controlled — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 3000 pieces per style.

The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or a finish that tarnishes or rubs off after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Placement Print — available on Felt, quoted per position and per colour.
• Flat Brim — available on Felt, quoted per position and per colour.
• Sandwich Brim — available on Felt, quoted per position and per colour.
• Rubber Coating — available on Felt, quoted per position and per colour.
• Packable Crushable Finish — available on Felt, quoted per position and per colour.
• Woven Patch — available on Felt, quoted per position and per colour.
• Ultrasonic Welding — available on Felt, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Felt
3. Shape sample with steam blocking applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for REACH nickel-release test for metal findings are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same soft crown collapse.

FAQ

Which compliance documents do you provide?

We prepare REACH nickel-release test for metal findings and the supporting test reports for the destination market.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Start your dad hat programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.