Custom Dad Hat in EVA Brim Insert with Paint Spray for Denim and Workwear Programmes

Custom Dad Hat — EVA Brim Insert with Paint Spray

We supply dad hat to brands, retailers, uniform and promotional programmes, made in EVA Brim Insert with paint spray for outerwear and jacket programmes. On headwear the specification that decides whether it sells or comes back is soft crown collapse, which is the point of the style but must be controlled — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 1000 pieces per style.

The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or packing that arrives mixed and unusable on the line. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare UKCA and REACH documentation so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Rhinestone Setting — available on EVA Brim Insert, quoted per position and per colour.
• 3D Puff Embroidery — available on EVA Brim Insert, quoted per position and per colour.
• Epoxy Dome — available on EVA Brim Insert, quoted per position and per colour.
• Moisture-Wicking Finish — available on EVA Brim Insert, quoted per position and per colour.
• Sewn Edge — available on EVA Brim Insert, quoted per position and per colour.
• Metal Eyelet — available on EVA Brim Insert, quoted per position and per colour.
• Pigment Dye — available on EVA Brim Insert, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed EVA Brim Insert
3. Shape sample with paint spray applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Felixstowe with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same soft crown collapse.

FAQ

Which compliance documents do you provide?

We prepare salt spray test for metal finishes and the supporting test reports for the destination market.

How long does sampling take?

A first sample takes 14 working days, and each revision about 5 days.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Start your dad hat programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.