Custom Dad Hat in Spandex Jersey with Sewn Edge for Outerwear and Jacket Programmes

Custom Dad Hat — Spandex Jersey with Sewn Edge

We supply dad hat to brands, retailers, uniform and promotional programmes, made in Spandex Jersey with sewn edge for childrenswear and schoolwear. On headwear the specification that decides whether it sells or comes back is shape change after washing, measured against the approved sample — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 1000 pieces per style.

The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or colour drift between the approved sample and the bulk trim. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Leather Patch — available on Spandex Jersey, quoted per position and per colour.
• Reflective Piping — available on Spandex Jersey, quoted per position and per colour.
• Packable Crushable Finish — available on Spandex Jersey, quoted per position and per colour.
• Metal Buckle Strap — available on Spandex Jersey, quoted per position and per colour.
• Paint Spray — available on Spandex Jersey, quoted per position and per colour.
• Heat Transfer Printing — available on Spandex Jersey, quoted per position and per colour.
• Hard Enamel Fill — available on Spandex Jersey, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Spandex Jersey
3. Shape sample with sewn edge applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same shape change after washing.

FAQ

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

What is the minimum order?

Programmes start at 1000 pieces per style per finish. Mixed sizes are fine within one style.

Which compliance documents do you provide?

We prepare OEKO-TEX Standard 100 for dyes and trims and the supporting test reports for the destination market.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Start your dad hat programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.